manualshive.com logo in svg

Canon Mk1500, User Manual, Page: 63 / 119

Share
Download
Canon Mk1500 User Manual Download Page 63

59

Advanced Operations   

Part 4

   Changing the spacing between characters  

The spacing between printed characters can be changed as desired. There are three possible spacings of printed 
characters, as shown below. Initially, “Narrow” is selected.

The spacing between printed characters can be changed for individual pages.

ex.  set the spacing between characters to “Wide”.

1

  Input the characters.

2

  Press [Style] and [

◄

] or [

►

] to select “3:Ctr spacing”, then 

press [Enter].

The Character Spacing selection display appears.

•

3

 Press 

[

◄

] or [

►

] to select “3:Wide”, and then press a [Enter].

The display returns to the character input display; you can now 
begin printing with the new spacing.

•

Character spacings that cannot be selected (printed)

If the segment length is specified by the user, some character spacings might not be 
available, depending on the text data that is input.

•

Summary of Contents for Mk1500
























































































































Reviews:

No comments