manualshive.com logo in svg

Canon Mk1500, User Manual, Page: 105 / 119

Share
Download
Canon Mk1500 User Manual Download Page 105

101

Maintenance 

Part 5

   Replacing a tube or the label tape cassette  

Remove the tube or label tape cassette as follows, and install a new one.
Contact your dealer if you need to purchase tube or label tape cassettes.

The procedure for replacing a tube or a label tape cassette also applies when replacing heat shrink tube, wrap around tape or 4mm I.D. strip. 
Clear tube is handled in the same way as regular tube.

1

  Press [Remove] and then [Enter].

Media is ejected in the opposite direction.

After pressing [Enter], use the feed function if the tube or label is not released from the 
transport roller (unable to remove) even after the printer has stopped. (“When a Tube or 
Label Tape is Not Ejected/Fed” (

 page 94))

•

2

  Open the cover.

3

  Remove the tube attachment or label cassette from the 

machine.

While pulling the lever to the right, lift and detach the label tape 
cassette.

Dispose the used tubes and label cassettes according to local government regulation.

•

4

  Install the new tube or label tape cassette.

See “Part 2 Basic Operation” for detail.

•

Summary of Contents for Mk1500
























































































































Reviews:

No comments