manualshive.com logo in svg

Canon Mk1500, User Manual, Page: 84 / 119

Share
Download
Canon Mk1500 User Manual Download Page 84

80

5

 Press 

[

►

] four times; “Right 1.0mm” is displayed.

Pressing [

►

] increases the value in steps of 0.25mm.

Press [

◄

] to move the printing start position to the left.

•

6

 Press 

[Enter].

The display returns to the character input display. The printing 
start position has now been shifted 1mm to the right. Next, move 
the vertical position down 0.5mm.

•

7

 Press 

[Option].

The Options display appears.

•

8

 Press 

[

◄

] or [

►

] to select “1:Adjustment”, and press Adjustment 

mode [Enter].

The Adjustments display appears.

•

9

 Press 

[

◄

] or [

►

] to select “2:Height”, and press [Enter].

The Select media display appears.

The vertical position can be set for each printing media

•

10

 Press 

[

◄

] or [

►

] to select “4:Label”, and press [Enter].

The Label size display appears.

•

11

 Press 

[

◄

] or [

►

] to select “3:12mm”, and then press [Enter].

The setting adjustment display appears.

When the print media is a 4mm I.D. strip, and wrap araund tape the size selection is 
skipped.

•

12

 Press 

[

▼

] two times; “Down 0.5mm” is displayed.

Pressing [

▼

] increases the value in steps of 0.25mm.

Press [

▲

] to move the vertical position up.

•

13

 Press 

[Enter].

The display returns to the character input display. The vertical 
position has now been shifted down by 0.5mm.

•

Summary of Contents for Mk1500
























































































































Reviews:

No comments