Canon Mk1500, User Manual, Page: 83 / 119

79
Advanced Operations
Part 4
Adjusting the printing start position and vertical position
When printing, enviromental factors or characteristics of the print media may cause printing to start slightly
out of position or to be shifted slightly in the vertical direction so that character data is not printed correctly,
even though the correct print media type and size are selected. In such cases, you can shift the printing position
slightly up/down or left/right.
The printing start position can be set independently for each print media.
Case 1
The character alignment is set to “Left” and the margin was set to “3mm”. However, when actually printed, the
margin is only 2mm.
Case 2
Printing is shifted up about 0.5mm.
ex. When printing on label tape (12mm wide), the phenomena described in case 1 and case 2
both occur simultaneously. Make the appropriate adjustments.
1
Press [Option].
The Options display appears. First move the printing start position
to the right 1 mm. •
2
Press [
◄
] or [
►
] to select “1:Adjustment”, and press Adjustment
mode [Enter].
The Adjustments display appears. •
3
Press [
◄
] or [
►
] to select “1:End portion”, and press Select
media [Enter].
The Select media display appears. •
4
Press [
◄
] or [
►
] to select "4:Label", and press [Enter].
The setting adjustment display appears. •