manualshive.com logo in svg

Canon Mk1500, User Manual, Page: 113 / 119

Share
Download
Canon Mk1500 User Manual Download Page 113

109

Appendices   

Part 6

6.3

  Troubleshooting

Symptoms

Cause

Action

The display remains blank when 
the power is turned on.

The AC adapter is not connected 
properly.

Turn the power switch off, and 
then make sure either that the AC 
adapter is securely plugged into the 
power outlet and is connected to 
the main unit. Then turn the power 
back on.

You are not using an AC adapter 
that is made for use with the 
printer.

Use an AC adapter that is 
speci

fi

 cally intended for the 

printer. Using another AC adapter 
could result in circuit damage or 
overheating.

A cause other than the above.

Restore all settings to their initial 
values. (page 87)

The startup display remains on the 
display; the input display does not 
appear.

Bad input data.

Restore all settings to their initial 
values. (page 87)

The printer does not print, or does 
not print correctly.

No character data has been input.

The printing operation cannot be 
performed if no character data has 
been input. Either input character 
data, or else load a 

fi

 le and prepare 

character data.

The size of the printing media 
that was selected for printing does 
not match the size of the printing 
media that has actually been loaded 
in the printer.

Con

fi

 rm the size of the printing 

media that is loaded in the printer, 
and then select the same size.

The printing start position and the 
printing vertical position are not 
set correctly.

Refer to “Adjusting the printing 
start position and vertical position” 
(page 79) and make the correct 
settings.

The ribbon cassette has not been 
set correctly.

Detach the ribbon cassette, take 
up the slack, and then reinstall the 
ribbon cassette.

The tube attachment or label tape 
cassette has not been installed 
correctly.

Detach the tube attachment or the 
label tape cassette and then install 
it again.

The tube or label tape is crushed, 
twisted, or otherwise misshapen.

Cut off the misshaped portion 
and then install the media again. 
Use printing media that is not 
misshaped.

The tube or label tape is dirty.

Remove the dirt.

The transport rollers are dirty.

Refer to “Cleaning the transport 
rollers” (page 102) and clean the 
transport rollers.

The print head is dirty.

Refer to “Cleaning the print head” 
(page 104) and clean the print 
head.

Tube cleaner is dirty.

Refer to “Cleaning/Replacing the 
tube cleaner” (page 104) and wipe 
the dirt with sponge.

Tube cleaner is worn.

Replace with new cleaner.
Contact your nearest dealer 
to purchase replacement tube 
cleaners.

Summary of Contents for Mk1500
























































































































Reviews:

No comments