Canon Mk1500 User Manual Download Page 110

Page: 110 / 119

106

6.1

Consumable Supplies and Options

Consumable supplies

The consumable supplies used by the printer are listed below. Contact your nearest dealer to purchase supplies.

Tube

Purchase any commercially available tube with an
inner diameter ranging from

2.5mm to 5.2mm.

The 0.5 mm-thick tube can be used with this printer.

Heat shrink tube cassette (white, yellow)

Purchase a special cassette.

Label tape cassette (white, yellow, silver)

Purchase a special cassette.

Wrap around tape cassette (white).

Purchase a special cassette.

4mm I.D. strip cassette (white, yellow)

Purchase a special cassette.

Ink ribbon cassette (black, white)

Purchase only special cassettes intended for use
with the printer.

List of consumable supplies

Cassettes
Ink ribbon cassette (black, white)
Label tape cassette (white)

6mm
9mm
12mm

Label tape cassette (yellow)

6mm
9mm
12mm

Label tape cassette (silver)

6mm
9mm
12mm

Heat shrink tube cassette (2:1 shrinkage)

3.2mm • White

• Yellow

4.8mm • White

• Yellow

6.4mm • White

• Yellow

Heat shrink tube cassette (3:1 shrinkage)

3.0mm • White

• Yellow

6.0mm • White

• Yellow

Wrap around tape (white)
4mm I.D. strip (white, yellow)

Miscellaneous
Cutter set
Cleaner set
Warmer cleaner set

Summary of Contents for Mk1500
























































































































Search results

Summary of Contents for Mk1500

Reviews:

Canon Mk1500, User Manual, Page: 110 / 119

Search results

Summary of Contents for Mk1500

Reviews: