Canon Mk1500 User Manual Download Page 46 | Manualshive

Page: 46 / 119

Canon Mk1500 User Manual Download Page 46

42

2.3

Printing on Wrap-around Tape

Wrap-around tape consists of a printable part and a transparent laminate. It is used for indicating the
destinations of cables.
Prepare a wrap-around tape cassette and print characters by the following procedure.
Note that a wrap-around tape cassette is not supplied with the machine; it must be purchased separately.

Installing the cassettes

Installing the wrap-around tape guide

Turn the power switch on

Input characters

Print

Installing the cassettes

Install a ribbon cassette and a wrap-around tape cassette.

1

Open the cover.

2

Take up any slack in the ribbon.

Remove the stopper and then take up any slack in the ribbon.

The printer cannot detect the ribbon if it has any slack in the ribbon. Always be sure to
take up slack in the ribbon when installing a cassette.

Dispose the removed stopper according to local government regulation.

•

«
...
44
45
46
47
48
...
»

Summary of Contents for Mk1500
























































































































Reviews:

No comments