manualshive.com logo in svg

Canon Mk1500, User Manual, Page: 77 / 119

Share
Download
Canon Mk1500 User Manual Download Page 77

73

Advanced Operations   

Part 4

ex.  Print the following character data with the segment length set to 50mm, “Left” set for the 

character alignment, and a margin of 5mm.

1

 Press 

[Length/Margin].

The Set length display appears.

•

2

 Press 

[

◄

] or [

►

] to select “2:Specify”, and then press Specify 

[Enter].

The segment length input display appears.

Segment length can be set from 8 to 150 mm.

•

3

  Enter “50” for the segment length, and press [Enter].

The character alignment selection display appears.

•

4

 Press 

[

◄

] or [

►

] to select “1:Left”, and then Press [Enter].

The margin setting input display appears.

The margin can be set from 2 to 5 mm only when left justi

fi

 ed is selected.

•

5

  Enter “5” for the margin, and press [Enter].

The display returns to the character input display.

•

6

  Enter the character data and proceed to print.

The segment (cutting) length setting is restricted by the entered character data.
Set it within the range of the displayed message.

Summary of Contents for Mk1500
























































































































Reviews:

No comments