Canon Mk1500 User Manual Download Page 85

Page: 85 / 119

Advanced Operations

Part 4

Adjusting the printing density

Printing may be too dark or too light in some cases, depending on the environment in which the printer is used
and the characteristics of the print media. In such cases, adjust the printing density. The printing density can be
adjusted to

ve levels.

ex. Printing on a tube is too light, so increase the printing density.

Press

[Option].

The setting display appears.

•

Press

[

◄

] or [

►

] to select “2:Print option”, and then press [Enter].

The setting display appears.

•

Press

[

◄

] or [

►

] to select “1:Density”, and then press [Enter].

The Print density selection display appears.

•

Press

[

►

] two times.

Print density “1” is the lightest print density, and print density “5”
is the darkest print density.

Press [

◄

] to make the printing density lighter.

•

Press

[Enter].

The display returns to the character input display. Maximum
density is now selected.

•

Summary of Contents for Mk1500
























































































































Search results

Summary of Contents for Mk1500

Reviews:

Canon Mk1500, User Manual, Page: 85 / 119

Search results

Summary of Contents for Mk1500

Reviews: