manualshive.com logo in svg

Canon LBP-800, Service Manual

Share
Download
Canon LBP-800 Service Manual Download Page 39

• Profile

The Profile reads and stores each item of the Page Setup tab, Finishing tab and Quality tab,
which performs operations of Add, Edit, and Select.  The Profile stores up to 50 items for each
login user.  As it stores in each login user, each Profile cannot be referred among them.

If the name of the printer driver is changed to another, all the profiles already registered will

be unreadable.  However, it enables the user to read the Profile again by reentering the name of
the driver.  It can also add and edit new profile by changing the name of the driver.

Even if the printer driver is unintalled, the Profile will not be deleted.  If the printer driver is

reinstalled, you can select and edit the registered items again.

This printer driver supports submitting information to files and reading it from files.

However, the Windows 95/98 profile files and the Windows NT4.0 profile files are not inter-
changeable.

Figure 1-7-17

(1) Profile :

Selects the registered Profile.

(2) Add :

Opens the Add Profile dialog box.

(3) Edit :

Opens the Edit Profile box.

CHAPTER 1

1 - 31

Add...

Edit...

Profile :

(1)

(2)

(3)

Summary of Contents for LBP-800



















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands