manualshive.com logo in svg

Canon iR2200 Series, Service Manual

Share
Download
Canon iR2200 Series Service Manual Download Page 332

COPYRIGHT © 2001 CANON INC. 

2000 2000 2000 2000

 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001

CHAPTER 8 PAPER DECK-L1

8-8 P

1.3.2 Indicating the Level of Paper (deck front cover)

The drive of the deck lifter motor [1] (M2D) is received by a coupling [2], and is for-

warded to the rack [4] by way of the drive belt [3]. The rack is equipped with a black belt
[4] designed to move inside the window [7] in the deck front cover [6] in keeping with the
movement of the rack.

When the paper starts to run out and the lifter moves up to the pickup position as a result,

the area of the black belt in the window accordingly increases (while the white area de-
creases), indicating the increasing level of paper.

F08-103-02

M2D

[1]

[2]

[3]

[4]

[5]

[6]

[7]

Summary of Contents for iR2200 Series

































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands