Canon iR2200 Series Service Manual Download Page 112

Page: 112 / 768

2000 2000 2000 2000

CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001

CHAPTER 2 ORIGINAL EXPOSURE SYSTEM

2-16 R

5.1 Exposure Lamp

5.1.1 Removing the Exposure Lamp

• Do not start to work if the

lamp is hot.

• Do not leave fingerprints on

the surface of the lamp.

• Do not subject the lamp to

impact.

• Do not touch the light win-

dow of the lamp without a
means of protection.

• Do not impose force on the

lamp.

• If the surface of the lamp is

soiled, dry wipe it.

1) Remove the copyboard glass. (p. 3-11R)
2) Remove the reader front cover

(2 screws) and the reader rear cover
(5 screws).

3) While taking care not to hold the scan-

ning lamp [1] and the reflecting shade
[2], move the No. 1 mirror base [3] as
far as the cut-off in the frame.

4) Remove the three screws [4] from the

No. 1 mirror base, and detach the scan-
ning lamp [1] together with the cable
fixing plate [5].

F02-501-01

5) Remove the screw [1], and detach the

connector cover [2] found at the rear.

F02-501-02

[1]

[4]

[2]

[4]

[1]

[5]

[3]

[1]

[2]

Summary of Contents for iR2200 Series

































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for iR2200 Series

Reviews:

Canon iR2200 Series, Service Manual, Page: 112 / 768

Search results

Summary of Contents for iR2200 Series

Reviews: