Canon iPF6100 - imagePROGRAF Color Inkjet Printer, Service Manual

Page: 57 / 367

Chapter 1
1-45
[Interface Setup]
T-1-18
Setting Item Description, Instructions
[EOP Timer] Specify the timeout period for print jobs.
[TCP/IP] [TCP/IP] Specify the TCP/IP protocol settings. To apply your
changes, choose Store Setting .
[IP Mode] Choose whether the printer IP address is configured
automatically or a static IP address is entered manually.
[Protocol] [DHCP] Specify the protocol used to configure the IP address
automatically.
[BOOTP]
[RARP]
[IP Setting] [IP Address] Specify the printer network information when using a
static IP address.
Enter the IP address assigned to the printer, as well as the
network subnet mask and default gateway.
[Subnet Mask]
[Default G/W]
[NetWare] [NetWare] Specify the NetWare protocol. To apply your changes,
choose Store Setting .
[Frame Type] Specify the frame type to use.
[Print Service] Choose the print service.
[AppleTalk] Specify whether to use the AppleTalk protocol. To apply
your changes, choose Store Setting .
[Ethernet
Driver] [Auto Detect] Specify the communication method. To apply your
changes, choose Store Setting .
Choose On for automatic configuration of the LAN
communication protocol. Choose Off to use settings
values of Comm.Mode and Ethernet Type .
[Comm.Mode] Choose the LAN communication method.
[Ethernet Type] Choose the LAN transfer rate.
[Spanning
Tree] Choose whether spanning-tree packets are supported over
the LAN.
[MAC Address] Displays the MAC address.
[Ext.Interface] When installing the expansion interface board, choose
whether the expansion interface board is used.
A confirmation
message is
displayed if you
press the
button. Choose
OK to restore
the network
settings to the
default values. A confirmation message is displayed if you press
the
button. Choose [OK] to restore the network
settings to the default values.