Canon iPF6100 - imagePROGRAF Color Inkjet Printer, Service Manual

Page: 344 / 367

Chapter 8
8-11
Hardware error.
03130031-2E17
Turn off printer,
wait, then
turn on again.
03130031-2F17 Pump encoder sensor error Check the purge unit.
Hardware error.
03130031-
2E2A
Turn off printer,
wait, then
turn on again.
03130031-2F2A Unable to detect the feed roller
home position Check the feed roller encoder
and surrounding part.
Check to see if paper has not
jammed.
Hardware error.
03130031-2E29
Turn off printer,
wait, then
turn on again.
03030000-2F29 Feed motor timeout (Roll media) Check the roll feed unit. Check
roll media. Check to see if paper
has not jammed in the printer.
Hardware error.
03130031-2E2E
Turn off printer,
wait, then
turn on again.
03130031-2F2E Roll travel timeout Check the roll feed unit.
Hardware error.
03130031-4027
Turn off printer,
wait, then
turn on again.
03130031-4027 Lift travel timeout error Check the carriage unit and
surrounding parts.
Hardware error.
03130031-2E13
Turn off printer,
wait, then
turn on again.
03130031-2F13 A/D converter external trigger
output stop detection hardware
error 1 If both printheads are signaled
faulty, take the following
corrective action:
1) Replace the left printhead
with a normal one.
2) Because the error indication
lasts, turn the printer off, then
back on.
3) Replace the right printhead
with a normal one, as the
automatic replacement of the
right printhead is suggested.
If a printhead is not at fault,
replace the main controller
board.
Display massage Code* Condition detected Action