Canon iPF6100 - imagePROGRAF Color Inkjet Printer Service Manual Download Page 19

Page: 19 / 367

Chapter 1

1-7

1.2.7 IEEE1394 (FireWire) Board

0016-8123

IEEE1394 (FireWire) expansion board (option)

An interface board that provides an additional IEEE1394 (FireWire) port.

F-1-13

1.2.8 Consumables

0016-8111

Printhead

The consumable print head is the same as that supplied with the printer.

F-1-14

Ink Tanks

The consumable ink tanks are available in twelve colors (matte black, black, photo cyan, cyan, photo magenta,

magenta, yellow, red, blue, green, photo gray, and gray). They are the same as those supplied with the printer.

Each ink tank must be replaced with a new one six month after you have opened the package.

The ink tank that can be used with this printer is labeled "H".

F-1-15

Summary of Contents for iPF6100 - imagePROGRAF Color Inkjet Printer















































































































































































































































































































































































Search results

Summary of Contents for iPF6100 - imagePROGRAF Color Inkjet Printer

Reviews:

Related manuals for iPF6100 - imagePROGRAF Color Inkjet Printer

Brands by name

Popular brands

Canon iPF6100 - imagePROGRAF Color Inkjet Printer, Service Manual

Search results

Summary of Contents for iPF6100 - imagePROGRAF Color Inkjet Printer

Reviews:

Related manuals for iPF6100 - imagePROGRAF Color Inkjet Printer

Brands by name

Popular brands