Canon iPF6100 - imagePROGRAF Color Inkjet Printer, Service Manual

Page: 345 / 367

Chapter 8
8-12
Hardware error.
03130031-2E32
Turn off printer,
wait, then
turn on again.
03130031-2F32 Multi sensor error Check the environment for
interferences from outside light.
Replace the multi sensor unit.
Cannot calibrate.
Press OK and try
calibration again.
03130031-2F34 Color calibration adjustment
failure error Check the environment for
interferences from outside light.
Replace the multi sensor unit.
Calibration
There is a problem
with the
multi-sensor.
Press OK to cancel
calibration.
03130031-2F35 Color calibration disabled Check the parts counter in
service mode.
Replace the multi sensor unit.
Hardware error.
03130031-2F3A
Turn off printer,
wait, then
turn on again.
03130031-2F3A Valve motor error Check the ink supply unit.
Hardware error.
03130031-2F3B
Turn off printer,
wait, then
turn on again.
03130031-2F3B CS communication error Remove the ink tanks and then
reload them.
Check the main controller PCB.
Hardware error.
03130031-260E
Turn off printer,
wait, then
turn on again.
0130031-260E Gap detection error Check the carriage unit and
surrounding parts.
Replace the main controller
PCB.
Hardware error.
03130031-2618
Turn off printer,
wait, then
turn on again.
03130031-2618 VH voltage error Check the power supply unit.
Hardware error.
03130031-260F
Turn off printer,
wait, then
turn on again.
03130031-260F Gap reference surface error Replace the reference surface
sheet.
Display massage Code* Condition detected Action