Canon iPF6100 - imagePROGRAF Color Inkjet Printer, Service Manual

Page: 312 / 367

Chapter 7
7-16
c) ADJUST
Performs adjustments and prints the adjustment and check patterns necessary for adjusting the printer parts.
1) PRINT PATTERN
T-7-12
LF & HAKUSYA and SENSOR CHECK are intended for factory adjustment purposes.
No adjustment by service personnel is required.
2) HEAD ADJ.
Set or initialize the registration adjustment values of each printheads.
T-7-13
Display Description
NOZZLE 1 Prints the nozzle check pattern by single direction/ single pass without using the
non-discharging back up.
It is used to check for the non-discharging nozzles.
- Media size: A4
- Media type: any
OPTICAL AXIS Prints the pattern and adjusts the optical axis of the multi sensor.
For details, refer to "Disassembly/Reassembly" > "Adjustment and Setup Items" >
"Procedure after replacing the carriage unit or multi sensor".
- Media type: photo glossy paper
LF & HAKUSHA * For Factory
SENSOR CHECK * For Factory
Display Description
AUTO
HEAD ADJ ROUGH Prints the pattern for auto head adjustment (rough adjustment).
MANUAL
HEAD ADJ DETAIL Prints the detail patterns for the manual head adjustment.
After printing, the mode will change to [ADJ. SETTING]. Check the printed
patterns and input the set values.
BASIC Prints the basic patterns for the manual head adjustment.
After printing, the mode will change to [ADJ. SETTING]. Check the printed
patterns and input the set values.
ADJ.
SETTING A to
F A-1 to
F-1 This mode is to input the registration adjustment values.
It is possible to return the values to the former one by printing the status print
before changing the value.
SAVE
SETTINGS Save the registration adjustment values that has been input.