Canon iPF6100 - imagePROGRAF Color Inkjet Printer, Service Manual

Page: 313 / 367

Chapter 7
7-17
3) NOZZLE CHK POS.
This mode for adjusting the optical axis of the head management sensor. For details, refer to "Disassembly/
Reassembly" > "Adjustment and Setup Items" > "Procedure after replacing the head management sensor".
4) GAP CLIB.
This mode measures the gap between the printhead and media by multi sensor and corrects the calibration value.
d) REPLACE
1) CUTTER
This mode is for replacing the cutter unit.
2) L&R PRINTHEADS
Replaces printheads L and R.
e) COUNTER
Displays the life (operation frequency and time) of each unit, print counts for each media type, and else.
The count values can be printed from [PRINT INF].
1) PRINTER: Counters related to product life
T-7-14
2) CARRIAGE: Counters related to carriage unit
T-7-15
3) PURGE: Counters related to purge unit
RESET SETTINGS Initialize the registration adjustment values (to 0).
Display Description Unit
LIFE TTL Cumulative number of printed media (equivalent of A4) sheets
LIFE ROLL Cumulative number of printed roll media (equivalent of A4) sheets
LIFE CUTSHEET Cumulative number of printed cut sheets (equivalent to A4) sheets
LIFE A-F Cumulative number of printed media for environments A to F sheets
POWER ON Cumulative power-on time (excluding the sleep time) Hours
W-INK Remaining capacity of the maintenance cartridge %
CUTTER Number of cutting operations (count as 1 by moving back and forth) Times
WIPE Number of wiping operations Times
Display Description Unit
PRINT Cumulative printing time Hours
CR COUNT Cumulative carriage scan count (count as 1 by moving back and forth) Times
CR DIST. Cumulative carriage scan distance (count as 1 by moving 210mm) Times
PRINT COUNT Cumulative print end count (count as 1 by capping) Times
Display Description