Canon iP110B Online Manual Download Page 298

Page: 298 / 427

Installing the Printer Driver

You can access our web site through the Internet and download the latest printer driver for your model.

The procedure for installing the downloaded printer driver is as follows:

1. Mount the disk

Double-click the disk image file you have downloaded.
The file is unpacked, and then the disk is mounted.

2. Start the installer

Double-click "PrinterDriver_XXX_YYY.pkg" (where "XXX" is your model name, and "YYY" is version)
contained in the disk.

3. Start the installation

Install the printer driver according to the messages on the screen.

When the Software License Agreement is displayed, check the contents, and click

Continue

. If you do

not agree to the terms of the Software License Agreement, you cannot install this software.

4. Selecting the install destination

If necessary, select where you want to install the printer driver, and then click

Continue

5. Executing the installation

Click

Install

When the authentication screen is displayed, enter the name and password of the administrator, and
then click

Install Software

(

6. Complete the installation

When the completion message appears, click

Close

The printer driver is installed successfully.

Important

• If the Installer does not operate properly, select

Quit Installer

from the

Installer

menu of the Finder to

quit the Installer. Then start the Installer again.

• You can download the printer driver for free, but you are responsible for paying any connection fees to

the Internet.

298

Summary of Contents for iP110B












































































































































































































































































































































































































































Search results

Summary of Contents for iP110B

Reviews:

Related manuals for iP110B

Brands by name

Popular brands

Canon iP110B, Online Manual

Search results

Summary of Contents for iP110B

Reviews:

Related manuals for iP110B

Brands by name

Popular brands