Canon ImageRunner C2550, Reference Manual

Page: 186 / 512

Specifying Common Settings 4-30
4
C
u
sto
m
iz
ing Settings
Default Display after Auto Clear
You can set whether the screen specified as the Initial Function is displayed after
the Auto Clear mode initiates.
NOTE
The time necessary for the Auto Clear mode to initiate can be set. (See "Auto Clear
Time," on p. 4-64.)
1
Press (Additional Functions)
➞
[Common Settings]
➞
[Auto
Clear Setting].
2
Select [Initial Function] or [Selected Function]
➞
press [OK].
Details of each item are shown below.
[Initial Function]: The screen specified as the initial function in [Function
Display Settings] in Common Settings (from the Additional
Functions screen) is displayed after the Auto Clear mode
initiates. For example, if you set the System Monitor screen
as the initial screen in Function Display Settings, and the
Auto Clear mode initiates while a settings screen for the
Mail Box function is shown, the display returns to the
System Monitor screen.
[Selected Function]: The display returns to the main screen of the function that
was displayed before the Auto Clear mode initiated. For
example, if you set the System Monitor screen as the initial
screen in Function Display Settings, and the Auto Clear
mode initiates while a settings screen for the Mail Box
function is shown, the display returns to the Inbox Selection
screen of the Mail Box Function.