manualshive.com logo in svg

Canon ImageRunner C2550, Reference Manual

Share
Download
Canon ImageRunner C2550 Reference Manual Download Page 295

Specifying Device Information Delivery Settings

6-47

6

System Mana

ger Settin

gs

CAUTION

 

Preparing for delivery and updating the information after it is received may take 
several minutes. Do not turn the main power OFF until these operations are 
complete. Doing so may result in loss of data or damage to the data.

IMPORTANT

 

•

Device information can be shared between machines of the same model (Color 
imageRUNNER C3480/C3480i/C3080/C3080i/C2550), and which have the Device 
Information Delivery Settings mode. However, some information may not be delivered 
correctly depending on the optional equipment that is attached to the machines.

•

If [Restrictions for Receiving Device Info.] under <Receiving Settings> is set to 'Off' in 
System Settings (from the Additional Functions screen), device information can be 
delivered from different machine models; however, some information may not be 
delivered correctly. (See "Restricting the Reception of Device Information," on p. 6-57.)

•

Device information cannot be delivered if the System Manager ID and System Password 
registered in the client machine differs from the System Manager ID and System 
Password registered in the host machine.

•

Printer settings can only be delivered if the same printer kit has been activated for both 
the client and host machine.

NOTE

 

Unique machine information, such as the IP address, is not delivered.

Paper Information

Importing and exporting 
of the Paper Type 
Management Settings

• The user-defined paper types that are 

already stored are delivered. Upon 
exporting, the user-defined paper 
information is duplicated and delivered. 
Upon importing, the user-defined paper 
types that are already stored are 
overwritten by the paper information.

Delivered 

Information

Contents

Notes

Summary of Contents for ImageRunner C2550

































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands