Canon ImageRunner C2550, Reference Manual

Page: 355 / 512

Envelope Feeder Attachment-C2 (Optional) 7-25
7
Routin
e Ma
intena
nce
IMPORTANT
•
Envelopes which have been rolled or curled must be straightened out prior to use.
•
Make sure that the height of the envelope stack does not fall below the height limit
mark (
).
•
The maximum height (quantity) of envelopes that can be loaded into the cassette is
approximately 1 1/4" (30 mm).
•
The maximum height (quantity) of envelopes varies according to the envelope type
and user operating conditions; but, as a reference, 1 1/4" (30 mm) is approximately
50 envelopes.
11
Turn the paper size dial on the right side of the paper drawer,
so that the arrow points to 'ENV.'. Then, set the size switch to
'ENV.1' or 'ENV.2'.
[ENV.1] enables the envelope size and type stored in ENV.1 in Envelope Cassette
in Common Settings (from the Additional Functions screen) to be loaded.
[ENV.2] enables the envelope size and type stored in ENV.2 in Envelope Cassette
in Common Settings (from the Additional Functions screen) to be loaded.
NOTE
To change the stored envelope setting, see "Designating the Envelope Type," on p.
4-35.
12
Gently push the paper drawer back into the machine until it
clicks into place in the closed position.
Arrow
Paper Size
Dial
Size Switch