Canon ImageRUNNER 1022iF, Service Manual, Page: 130 / 270

Chapter 8
8-8
F-8-17
3) Remove the two pressure spring [1], and then remove the two pressure
plate [2].
F-8-18
See the illustration below when reinstalling the pressure springs [1] and
plates [2].
F-8-19
4) Remove the screw [1] and remove the delivery guide [2].
F-8-20
5) Remove the two screws [1], and then remove the grounding plate [2] and
guide [3].
F-8-21
6) Remove the fixing film unit [1].
F-8-22
8.4.4 Fixing Delivery Sensor
8.4.4.1 Removing the Delivery Sensor
0013-1243
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
1) Remove the front cover and front-left cover.
2) Remove the boss [1], and then slide the guide (front) [2] upward to remove
it.
F-8-23
3) Disconnect the connector [1], and remove the delivery sensor [2] with the
claw released.
[1]
[3]
[2]
[1]
[2]
[2]
[1] [1]
[2]
[1]
[2]
[1]
[3]
[1] [2]
[1]
[1]
[2]