Canon ImageRUNNER 1022iF, Service Manual, Page: 114 / 270

Chapter 7
7-8
F-7-17
7.6.8 Registration Roller
7.6.8.1 Removing the Registration Roller
0013-1235
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
1) Remove the control panel.
2) Remove the developing unit.
3) Remove the registration clutch.
4) Remove the two shafts [1], and then remove the transfer guide [2].
F-7-18
5) Release the two hooks [1], and then detach the registration sensor cover
[2].
F-7-19
6) Remove the two bosses [1], disconnect the connector [2], and then slide
the registration sensor unit [3] toward you to remove it.
F-7-20
7) Make a note of the positions ([A] to [C]) of two springs [1]. Next, remove
the two springs [1].
F-7-21
8) Remove the four high voltage contacts [1] and the interlock switch [2].
F-7-22
9) Remove the three screws [1], and slide the three voltage cable guide
(right).
[1]
[1]
[1]
[2]
[1]
[2]
[2] [3]
[1]
[1]
[2]
[2]
[1]