Canon imagePROGRAF GP-300, Online Manual

Page: 205 / 840

Set the password by using 4 to 32 characters.
The allowed characters are single-byte alphanumeric characters, blank space, umlaut
characters, and the below characters.
- ! @ # $ % ^ & * _ ; : , . / ` = + ' " ( ) { } [ ] < > |
For security reasons, we recommend you use 8 and more alphanumeric characters.
7. When completion message appears, select OK . 7.
Setting Standard User Password
For restricting the function for standard user, enable the standard user mode and set a standard user
password by following the steps below.
1. Start up Remote UI . 1.
Start up Remote UI
2. Select Security . 2.
The menus appear.
3. Select Standard user mode settings . 3.
4. When confirmation message appears, select Yes . 4.
5. Enter password and select OK . 5.
Important
• The following character restrictions apply to the password: •
Set the password by using 4 to 32 characters.
The allowed characters are single-byte alphanumeric characters, blank space, umlaut
characters, and the below characters.
- ! @ # $ % ^ & * _ ; : , . / ` = + ' " ( ) { } [ ] < > |
For security reasons, we recommend you use 8 and more alphanumeric characters.
6. When completion message appears, select OK . 6.
205