Canon imageFORMULA DR-2050C Page 18 User Manual Download

Page: 18 / 94

Before Using the Scanner

Back/Left Side

CAUTION
Make sure that ventilation openings are not blocked. Blocked
openings can cause internal heat build up, creating the risk of fire.

Conventions

(ON)

(OFF)

USB Connector

Connect the included USB
cable or one that supports
Hi-Speed USB 2.0.

Power Connector

Connect the AC adapter that
is provided with the scanner.

Kensington Slot

Used for anti-theft measures.
Theft can be prevented by
attaching a chain, etc.

Ventilation
Openings

Power Switch

Turns the scanner
ON and OFF.

indicating page-by-page feeding
of document (Page Separation
mode).

indicating multi-page document
alignment.

indicating document setting
method (center position, front/
back, feed direction).

Summary of Contents for imageFORMULA DR-2050C































































































Search results

Summary of Contents for imageFORMULA DR-2050C

Reviews:

Related manuals for imageFORMULA DR-2050C

Brands by name

Popular brands

Canon imageFORMULA DR-2050C, User Manual

Search results

Summary of Contents for imageFORMULA DR-2050C

Reviews:

Related manuals for imageFORMULA DR-2050C

Brands by name

Popular brands