Canon imageFORMULA DR-2050C Page 19 User Manual Download | Manualshive

Page: 19 / 94

background image

Before Using the Scanner

15

Cha

p

ter 1

4. Installation Requirements

To use the DR-2050C/DR-2050SP, your computer must satisfy the following
system requirements.

• One of the following operating systems:

- Microsoft Windows 98SE
- Microsoft Windows Me
- Microsoft Windows 2000 Professional SP4 or later
- Microsoft Windows XP Professional SP2 or later
- Microsoft Windows XP Home Edition SP2 or later

• A computer that meets the following specifications:

- CPU: Intel Celeron 733 MHz or faster
- Memory: 256 MB or more
- Hard disk: 512 MB or more available space
- CD-ROM drive
- Hi-Speed USB 2.0 interface
- Monitor: Resolution of 1024 × 768 (XGA) or better recommended.

• USB interface connections vary according to the operating system as shown

below.
- Windows 98SE/ME: USB Full-Speed (equal to USB 1.1)
- Windows 2000/XP: Hi-Speed USB 2.0/USB Full-Speed (equal to USB

1.1)

• An ISIS-compatible application or a TWAIN-compatible application that is

compatible with the above operating systems.

IMPORTANT

• If you do not know the requirements for your computer system, contact the

store where you purchased the computer or the manufacturer of the
computer for more information.

• Use the most recent version of the USB 2.0 driver provided by Microsoft.

Contact your local authorized Canon dealer or service representative for
more detailed information.

• Not all USB interfaces provided as standard with personal computers are

guaranteed. Contact your local authorized Canon dealer for more detailed
information.

• Scanning speeds are lower if your computer’s standard USB interface is

USB Full-Speed (equal to USB 1.1).

• Use the USB cable provided with the scanner, or a Hi-Speed USB 2.0

compatible cable.

• If the CPU, memory, interface card, and other specifications do not satisfy

the installation requirements, the scanning speed may be greatly reduced and
transmission may take a long time.

«
...
17
18
19
20
21
...
»

Summary of Contents for imageFORMULA DR-2050C































































































Reviews:

No comments

Related manuals for imageFORMULA DR-2050C

Brand: Aerotech Pages: 58

Brand: U-Line Pages: 3

Brand: Denso Pages: 52

Brand: THORLABS Pages: 15

OpticFilm 7200i SE

Brand: Plustek Pages: 2

Brand: R&S Pages: 70

Brand: FAAC Pages: 12

Brand: Digitus Pages: 12

Brand: Hanatech Pages: 189

Brand: UMAX Technologies Pages: 106

Brand: UMAX Technologies Pages: 67

Brand: Uniden Pages: 13

Brand: Uniden Pages: 92

MobileOffice D600 Plus

Brand: Plustek Pages: 35

Brand: HQ Power Pages: 27

Brand: Hyco Pages: 16

Brand: Faro Pages: 12

Scantech ID 700 Series

Brand: Champtek Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands