Canon imageFORMULA DR-2050C, User Manual

Page: 49 / 94

Using the Scanner
45
Cha
p
ter 2
Scanning Multiple Documents
• I want to divide a document that cannot be placed all at once into
multiple stacks and scan them as a single file
Set the “Feeding Option” in the Scanner Settings to [Automatic Feeding].
When the scanner detects a document, scanning starts automatically, and you
can continue scanning batches until your job is complete.
When “Feeding Option” is set to [Panel-Feeding], scanning does not start
until you place your document and press Scan button. This is handy when
you need to align the edges of the document after it has been placed.
See “ISIS Driver Settings
h
,” on p. 50, and “TWAIN Driver Settings
h
,”
on p. 52.
• I want to divide up scanned images by individual document
stacks to save as separate files
Set the “Feeding Option” to [Automatic Feeding] or [Panel-Feeding], and set
[Batch Separation] to [Auto]. (ISIS driver only)
See “ISIS Driver Settings
h
,” on p. 50, and “ISIS Driver Settings
i
,” on
p. 50.
• I want to scan a document one sheet at a time
Set the “Feeding Option” to [Automatic Feeding] or [Panel-Feeding] to scan
one sheet at a time. Scanning is interrupted after one page of the document is
scanned.
If the “Feeding Option” is set to [Automatic Feeding] and the next document
is loaded, the scanner starts scanning when it detects the next document.
If the “Feeding Option” is set to [Panel-Feeding] and the next document is
loaded, the scanner starts scanning when the Scan button is pressed.
See “ISIS Driver Settings
h
,” on p. 50, and “TWAIN Driver Settings
h
,”
on p. 52.