Canon imageFORMULA DR-2050C Page 30 User Manual Download

Page: 30 / 94

Using the Scanner

How to Feed with the Bypass Mode

Raise the feed selection lever (Bypass mode).

Adjust the document guide to the width of the document being scanned.

Start scanning from the application.

Set the document in the scanner with the back of the document facing forward
and its top edge facing downwards.

The document is scanned as it is detected.

IMPORTANT

• When scanning documents that are fastened together, such as invoices, set

the edge that is fastened together as the leading edge.

• After you finish scanning, close the document feed tray and the upper cover

to prevent damage to the scanner while it is not being used.

Bypass mode

Page Separation

mode

Summary of Contents for imageFORMULA DR-2050C































































































Search results

Summary of Contents for imageFORMULA DR-2050C

Reviews:

Related manuals for imageFORMULA DR-2050C

Brands by name

Popular brands

Canon imageFORMULA DR-2050C, User Manual

Search results

Summary of Contents for imageFORMULA DR-2050C

Reviews:

Related manuals for imageFORMULA DR-2050C

Brands by name

Popular brands