manualshive.com logo in svg

Canon imageFORMULA DR-2050C, User Manual, Page: 52 / 94

Share
Download
Canon imageFORMULA DR-2050C User Manual Download Page 52

48

Using the Scanner

Prescan Function

• I want to preview the image before I scan it

For the ISIS driver, check the [Prescan] checkbox. The Prescan window is 
displayed when scanning starts.
See “ISIS Driver Settings 

k

,” on p. 50.

For the TWAIN driver, check the [Prescan] checkbox and click [Preview]. 
One sheet of the document is scanned, and the Prescan window is displayed.
See “ISIS Driver Settings 

j

,” on p. 50, and “ISIS Driver Settings 

n

,” on 

p. 50.

Registering Settings

• I want to use preset scanning conditions again

Assign a name to the scanning conditions and register them as a user 
preference. If you select the name of an already registered user preference, 
the conditions you set overwrite the settings of the selected user preference.
See “ISIS Driver Settings 

a

,” on p. 50, and “TWAIN Driver Settings 

a

,” 

on p. 52.

With CapturePerfect 3.0 Scan JOB function, the scan mode can also be 
registered with the scanning conditions as a job, and scanning can be 
performed by selecting the job and then executing the scan job.

Summary of Contents for imageFORMULA DR-2050C































































































Reviews:

No comments