Canon imageCLASS LBP162dw User Manual Download Page 256

Page: 256 / 373

Relocating the Machine

23FJ-04E

The machine is heavy. Make sure to follow the procedure below when moving the machine to avoid injury, and also

make sure to read the safety precautions before you begin. Important Safety Instructions(P. 2)

Turn OFF the machine and computer.

●

When you turn OFF the machine, data that is waiting to be printed is deleted.

Disconnect the cables and cord from the machine in numerical order as in the
illustration below.

●

Whether the cables with "

" are connected depends on your environment.

Power plug

Power cord

USB cable

LAN cable

When transporting the machine across a long distance, remove the toner cartridge
and the drum cartridge.

Procedure for Replacing the Toner Cartridge(P. 244)
Procedure for Replacing the Drum Cartridge(P. 247)

Open the front cover and remove any paper.

●

If the paper guides are extended, return them so that they fit in the drawer.

Close the front cover, paper stopper, and all similar parts, and then move the
machine to a new location.

Maintenance

251

Summary of Contents for imageCLASS LBP162dw






















































































































































































































































































































































































Search results

Summary of Contents for imageCLASS LBP162dw

Reviews:

Brands by name

Popular brands

Canon imageCLASS LBP162dw, User Manual

Search results

Summary of Contents for imageCLASS LBP162dw

Reviews:

Brands by name

Popular brands