manualshive.com logo in svg

Canon imageCLASS LBP162dw, User Manual

Share
Download
Canon imageCLASS LBP162dw User Manual Download Page 212

<Preferences>

23FJ-040

All the settings related to viewing of the display are listed with descriptions. Default settings are marked with a dagger

( ).

Asterisks (

*

)

●

Settings marked with an asterisk (

*

) may be unavailable or vary or have different defaults depending on your

country or region.

<Display Settings>

<Contrast>

Adjust the contrast (the difference between the light and dark parts) of the display to suit the installation

location of the machine.

Five Levels

<Menu>   <Preferences>   <Display Settings>   <Contrast>   Adjust the contrast   

<Invert Screen Colors>

Select <On> to invert the display colors. Select <On> if the display is hard to view even after the brightness was

adjusted in <Contrast>.

<Off>
<On>

<Menu>   <Preferences>   <Display Settings>   <Invert Screen Colors>    Select <Off> or <On>

<Millimeter/Inch Entry Switch>

 *

Select the unit of measurement.

<Millimeter>
<Inch>

Setting Menu List

207

Summary of Contents for imageCLASS LBP162dw






















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands