manualshive.com logo in svg

Canon imageCLASS LBP162dw, User Manual

Share
Download
Canon imageCLASS LBP162dw User Manual Download Page 297

Maximum number of wireless devices connected w/ Direct Connection has
been reached. To connect other devices, terminate some of current
connections.

The number of directly connected mobile devices is at a maximum.

●

To connect other devices by Direct Connection, disconnect current device(s) and try connecting again.

Connecting Directly (Access Point Mode)(P. 126) 

No Paper: XXXX

*

*

<Drawer 1> or <MP Tray> is displayed for XXXX.

Paper is not loaded in the drawer or the multi-purpose tray.

●

Load the paper.

Loading Paper(P. 94) 

Paper on which reports or lists can be printed is not loaded.

●

Reports or lists can be printed on A4 or Letter size paper. Load A4 or Letter size paper and set its size.

Loading Paper(P. 94) 
Specifying Paper Size and Type(P. 105) 

No reply from the destination.

A network cable may be disconnected, or there may be a problem in a switch.

●

Check the status of the network cables and switches.

No response from host.

The machine is not connected to a network correctly.

●

Check the machine and network settings, and connect again.

Setting Up the Network Environment(P. 21) 

Paper jammed.

Paper jams.

●

Remove the jammed paper, and print again (Printing may resume automatically).

Clearing Paper Jams(P. 297) 

Troubleshooting

292

Summary of Contents for imageCLASS LBP162dw






















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands