manualshive.com logo in svg

Canon imageCLASS LBP162dw, User Manual

Share
Download
Canon imageCLASS LBP162dw User Manual Download Page 299

The WEP key is not set correctly. Check the WEP settings.

The network key (the WEP key) of a wireless router to be connected is not set to the machine correctly.

●

Check the network key (the WEP key) of the wireless router, and set it to the machine again.

Checking the SSID and Network Key(P. 36) 
Setting Up Connection by Selecting a Wireless Router(P. 31) 
Setting Up Connection by Specifying Detailed Settings(P. 33) 

The authentication method of the machine is set to <Shared Key>, but that of the wireless router is set to

"Open System."

●

Connect again by selecting a wireless router or by manually changing the WEP authentication method to
<Open System>.

Setting Up Connection by Selecting a Wireless Router(P. 31) 
Setting Up Connection by Specifying Detailed Settings(P. 33) 

●

Change  the  WEP  authentication  method  to  "Shared  Key"  at  the  wireless  router,  and  connect  again.  For
more  information  about  how  to  change,  see  the  instruction  manuals  for  your  networking  devices  or
contact your manufacturer.

Toner Cart. Life End Replace the toner cartridge.

The toner cartridge has reached the end of its lifetime.

●

Replace the toner cartridge with a new one.

Replacing the Toner Cartridge(P. 243) 

Toner cart. life end. Replcmt. recommended.

The toner cartridge has reached the end of its lifetime.

●

Replacement of the toner cartridge is recommended.

Replacing the Toner Cartridge(P. 243) 

Toner cart. reached end of lifetime.

The toner cartridge has reached the end of its lifetime.

●

Replace the toner cartridge with a new one.

Replacing the Toner Cartridge(P. 243) 

Turn main power OFF and ON. If device does not recover, contact your
dealer or service representative.

An error has occurred with the machine.

Troubleshooting

294

Summary of Contents for imageCLASS LBP162dw






















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands