manualshive.com logo in svg

Canon imageCLASS LBP162dw, User Manual

Share
Download
Canon imageCLASS LBP162dw User Manual Download Page 132

Connecting multiple mobile devices at the same time

●

Configure the machine's SSID and network key arbitrarily. The network key can be left blank.  <Access
Point Mode Settings>(P. 199) 

Connecting Directly

●

It may take time until a connection of the machine and the mobile device is established.

1

Select <Menu> in the Home screen.  Home Screen(P. 87) 

●

When any mobile device is already connected, press 

, and proceed to step 3.

2

Select <Direct Connection>.

●

If a message appears, continue by following the instructions on the screen.

3

Select <Display SSID/Network Key>.

4

Configure the Wi-Fi settings from the mobile device using the SSID and network key
information that appear on the display.

5

When the target operation is completed, press 

, then select <Disconnect>   <Yes>.

●

Select <Connection Information> on the screen under the direct connection to check the connected mobile
device.

●

While connecting via direct connection, you may not be able to connect to the Internet depending on the
mobile device you are using.

●

If a wireless connection from the mobile device is not performed within 5 minutes while the SSID and
network key are displayed, the connection waiting state terminates.

●

If the status without data transmission between the mobile device and the machine continues during
communication by direct connection, the communication may end.

●

Power saving performance of sleep mode degrades while connecting via direct connection.

●

If the machine is used with a wireless LAN, you need to keep the machine connected to the wireless LAN
when using direct connection. When the machine is not connected to a wireless LAN or the connection
process is not complete yet, the direct connection process cannot begin. If the connection between the
machine and the wireless LAN is lost during communication through direct connection, the communication
may end.

Linking with Mobile Devices

127

Summary of Contents for imageCLASS LBP162dw






















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands