manualshive.com logo in svg

Canon imageCLASS LBP162dw, User Manual

Share
Download
Canon imageCLASS LBP162dw User Manual Download Page 12

Laser beam

●

If the laser beam should escape and enter your eyes, exposure may cause damage to your eyes.

When transporting the machine

●

To prevent damage to the machine during transport, perform the following.
- Remove the toner cartridges and the drum cartridges.
- Securely pack the machine in the original box with packing materials.

If the operating noise concerns you

●

Depending on the use environment and operating mode, if the operating noise is of concern, it is
recommended that the machine be installed in a place other than the office.

Other precautions

●

Follow the instructions in the caution label attached to this machine.

●

Avoid shaking or applying shock to this machine.

●

Do not forcibly open and close doors, covers, and other parts. Doing so may result in damage to the
machine.

●

Do not touch the contacts (

) inside the machine. Doing so may result in damage to the machine.

●

To prevent a paper jam, do not turn OFF the power, open/close the covers, and load/unload the paper when
printing.

Important Safety Instructions

7

Summary of Contents for imageCLASS LBP162dw






















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands