manualshive.com logo in svg

Canon imageCLASS LBP162dw, User Manual

Share
Download
Canon imageCLASS LBP162dw User Manual Download Page 252

●

Press and hold the Back key. On the <Output Report> screen, print the consumables status report to
find out the cartridge name.  Printing Reports and Lists(P. 254) 

Procedure for Replacing the Drum Cartridge

When you replace the drum cartridge, simple instructions on the replacement procedure are displayed on the screen.

See the on-screen instructions as well as the following procedure.

1

Close the paper stopper, and then open the toner cover.

2

Remove the toner cartridge.

Do not shake or tilt the toner cartridge. Also, make sure to avoid applying shocks to the toner cartridge, such

as by hitting it against something. Doing so may cause the toner left in the toner cartridge to leak. Remove

the toner cartridge gently at the same angle as the slot.

3

Remove the drum cartridge.

Maintenance

247

Summary of Contents for imageCLASS LBP162dw






















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands