manualshive.com logo in svg

Canon GP160, Service Manual

Share
Download
Canon GP160 Service Manual Download Page 653

COPYRIGHT

 

C

 

1999 CANON INC.

CANON 2220/2210/2200/160/3000 REV.1 FEB. 1999 PRINTED IN JAPAN [IMPRIME AU JAPON]

I 

- 2

PREFACE

This Parts Catalog contains listings of parts used in the Canon GP160PF/GP160F/ 

GP160DF/GP160/LP3000/LP3010. Diagrams are provided with the listings to aid the 

service technician in identifying clearly, the item to be orderd.

Whenever ordering parts, consult this Parts Catalog for all of the information per-

taining to each item. Be sure to include, in the Parts Request, the full item

description, the item part number, and the quantity. 

Canon Inc.

Office Imaging Products Technical Support Dept.3

Office Imaging Products Technical Support Div.

5-1, Hakusan 7-chome, 

Toride-shi, Ibaraki 302-8501, Japan

COPYRIGHT   C   1999 CANON INC.

Use of this manual should be

strictly supervised to avoid dis-

closure of confidential infor-

mation.

Summary of Contents for GP160






























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands