manualshive.com logo in svg

Canon GP160, Service Manual

Share
Download
Canon GP160 Service Manual Download Page 645

A-22

APPENDIX

ADF

The following type of documents will not provide guaranteed operation

• OHP film
• Documents with holes for file storage
• Stapled documents, documents containing paper clips or with glue on them
• Documents to which paper clippings have been attached.
• Documents with carbon paper attached on the back
• Excessively curled, folded or wrinkled documents

Tell users that if they have to use curled documents to make them as straight as pos-

sible and to place the most deformed part of the document to the rear.

Item

Document pick-up system

Document types

Document size

Document set orientation

Document set position

Document processing
mode

AutNumber of stackable
documents

Mix originals

Document size recognition

Stamp function

Power supply

Serial number

Operating environment

Ambient temperature
Ambient humidity range

Specifications

Omatic pick-up/delivery system

One-sided sheet documents (50 to 200 g/m

2

)

A3, B4, A4, A4R, B5, B5R, A5, A5R, 11 

×

17, LGL, LTR, LTRR

(paper feed up to 1 m is possible during fax transmission)

• Place documents face down.
• Place the first document page at the bottom.

Center reference.

One-sided original 

→

one-sided scanning.

• A3, B4, 11 

×

17, LGL: 20 pages or less.

• A4, A4R, B5, B5R, A5, A5R, LTR, LTRR: 50 pages or less.

No

Yes (regular size only)

Yes (yellow)

Supplied by unit (5 or 24 V DC)

Eur: ZSSxxxxx

Asia: ZSXxxxxx

As per copier specifications.

Specifications are subject to change for the sake of product improvements.

Summary of Contents for GP160






























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands