manualshive.com logo in svg

Canon GP160, Service Manual

Share
Download
Canon GP160 Service Manual Download Page 25

COPYRIGHT © 1999 CANON INC.                CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

CHAPTER 1  INTRODUCTION

1-13

B.

Basic operation

The basic operations of the copy keys on the operation panel are listed below.

Table 1-401

C.

Advanced features

The basic operations of the advanced copy feature keys on the operation panel are

listed below.

Table 1-402

Key name

Reproduction ratio key

Paper selection key

Scanning mode key

Details

Selects fixed ratio change (2R2E) or zoom (50 to 200%).

Selects the pick-up cassette.

Selects the scanning density (automatic, F1 to F9) and the
image quality (character, character/photo, photo).

Key name

Page separation

Binding margin

Frame erasing

Document frame 
erasing

Sheet frame 
erasing

Book frame 
erasing

Punch hole 
erasing

2 in 1 copy

Details

Performs left/right page separation copy in the book mode.
Sets the left and right margins and designates the 2-page
spread copy size.

Creates a binding margin on the paper. Sets the margin
position (left margin, right margin, top margin, bottom mar-
gin) and also the margin width (1 to 10mm).

Sets the frame erasing position.

Copies with document frame erasing.

Creates a margin around the outside of the document and
copies.

When copying books, etc., the surrounding and center
margins are deleted.

Erases punch holes from the left margin of copied docu-
ments.

Inputs the document size and paper size and designates 2
in 1 copying.

Summary of Contents for GP160






























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands