manualshive.com logo in svg

Canon GP160, Service Manual

Share
Download
Canon GP160 Service Manual Download Page 13

COPYRIGHT © 1999 CANON INC.                CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

CHAPTER 1  INTRODUCTION

1-1

I. FEATURES

< Copy function >

• 1200 equivalent 

×

600dpi high resolution copy

• Due to a new engine, high image quality printing with minute particle super fine

toner (diameter 5 microns) has been made possible.

• Due to the integrated drum, toner cassette, the print inner assembly is refreshed

when the cartridge is replace.

• 256 gradation readings, and realistic half tone rendering.
• Max. 5 way / max. 1100 sheets large volume multi-level pick-up.
• Dual operation - allows copying during fax transmission.

< Fax function >

• High speed Super G3 Fax 2 second transmission (33.6kbps) provided as standard

for ordinary telephone lines.

• Able to send and receive A3 size direct copy.
• 400dpi scanning resolution ultra high image quality (ultra fine mode).
• 600dpi recording resolution ultra high image quality, standard mode 600dpi print-

ing.

• Standard 1megabyte memory (roughly 64 sheets), possibility to expand to maxi-

mum 9 megabytes (roughly 576 sheets).

Summary of Contents for GP160






























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands