manualshive.com logo in svg

Canon GP160, Service Manual

Share
Download
Canon GP160 Service Manual Download Page 220

COPYRIGHT © 1999 CANON INC.                CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

CHAPTER 11  INSTALLATION

11-14

2.

Setting the date and time (User mode operation)

No.

Work details

Illustration/ remarks

1

Press the Data Registration Key
to display the user mode screen.

User mode screen

2

Confirm that 01 DATA REGIS-
TRATION has been selected,
and press the Set key.

3

Confirm that 01 USER SET-
TINGS has been selected, and
press the set key.

SELECT AN ITEM

01 DATA REGISTRATION
02 TEL# REGISTRATION

REGISTRATION/SETTING

4

Confirm that 01 DATE/TIME
SETTING has been selected,
and press the set key. The date
and time which had been previ-
ously set will be displayed.

5

Enter the current date and time.
Use the shift keys 

to move

the cursor to enter the desired
numbers.

6

Press the set key. This sets the
date and time.

DATE/TIME SETTING

19/04/98         19:02

Summary of Contents for GP160






























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands