manualshive.com logo in svg

Canon GP160, Service Manual

Share
Download
Canon GP160 Service Manual Download Page 54

COPYRIGHT © 1999 CANON INC.                CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

CHAPTER 2  BASIC OPERATION

2-2

B.

Copy operation overview

This unit will, depending on the copy mode set by the customer, automatically oper-

ate in the direct copy mode or memory copy mode.

Memory copy: After storing all the image data read from one job in the image data

housing memory DRAM (IC7, IC8, IC9, IC10) on the image processor PCB, the printing
operation begins.

The operating conditions for the copy mode and memory copy mode are described

below.

Conditions for the different copying methods

*1 Book mode is when the document is set on the copyboard glass and then copied.
*2 Sheet mode is when the document is set in the ADF and then copied.

Table 2-101

Reference:

When copying using the multi-feeder pick-up, memory copying will take place no mat-
ter what conditions are in effect.

Document scanning mode

Book mode*1

Sheet mode

No designation

Copy mode

No designation

Sort mode

For 2 in 1 mode

Other than sort 
mode, 2 in 1 mode

Copy by multi-feeder
pick-up

Number of copies

1 to 99

No designation

No designation

1 sheet

2 sheets or more

No designation

Copy method

Direct copy

Memory copy

Memory copy

Direct copy

Memory copy

Memory copy

Summary of Contents for GP160






























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands