manualshive.com logo in svg

Canon GP160, Service Manual

Share
Download
Canon GP160 Service Manual Download Page 457

CHAPTER 1  MAINTENANCE AND SERVICING

1-7

c) Do not manually open the shutter of the photosensitive drum on the bottom of the

cartridge. Do not touch the surface of the photosensitive drum.

d) Do not disassemble the cartridge.
e) Do not subject to unnecessary vibration or shock.

Particularly, do not subject the photosensitive drum to pressure from the top of the
photosensitive drum cover shutter.

f)

When transporting the copier, remove the cartridge from the main unit. Place the
cartridge in the protective bag or wrap in a thick cloth and keep out of direct light.

g) Do not store near computer monitors, disk drives or floppy disks. (The magnetism of

the cartridge may damage the data stored in these devices.)

h) Store out of reach of children and infants.
i)

The photosensitive drum is sensitive to strong light, so the cartridge is equipped with
a light-blocking shutter. However, if subjected to strong light for an extended period
of time, white spots and vertical bands may appear on the images. In that case,
refraining from use of the machine for as long as possible will result in almost com-
plete recovery. However, in some cases the traces (white spots, vertical bands) may
not disappear.
Please note the following items.

j)

Instruct the user to return used cartridges to a designated collection center.

If the surface of the photosensitive drum is accidentally soiled, wipe with a polishing
cloth dampened with toner. Do not wipe with a dry cloth or clean with solvents.

Caution

:

1. Perform jam removal and cartridge replacement promptly.
2. When the cartridge is removed from the copier and stored, or when using a color

cartridge, be sure to place the cartridge in a storage box or cover it with a cloth. Do
not leave the cartridge exposed, once removed from the main unit.

Caution

:

Summary of Contents for GP160






























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands