![background image](http://html.mh-extra.com/html/canon/dr-6080/dr-6080_service-manual_62889113.webp)
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
3 - 31
CHAPTER 3 DISASSEMBLY & REASSEMBLY
Precautions during assembly
•
Align the holes to the positioning bosses
(one on each side) and install the platen unit
using two screws
. Be careful not to drop the
screws into the machine.
Positioning boss
Screw
Platen unit
Fig. 3-324
11. Lower reading roller
1) Detach the platen unit. For details, refer to
the section entitled "Front platen roller".
2) Unfasten two E-rings
(one on each side),
the pulley
, pin
, and two bearings
(one on each side) in sequence, and then
detach the lower reading roller
.
E-ring
Pulley
Pin
Bearing
Lower reading roller
Fig. 3-325
Precautions during assembly
•
Be sure to install the pulley with the flange
correctly oriented. The pulley for the lower
reading roller is flanged on the inside.
Summary of Contents for DR-6080
