![background image](http://html.mh-extra.com/html/canon/dr-6080/dr-6080_service-manual_62889091.webp)
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
3 - 9
CHAPTER 3 DISASSEMBLY & REASSEMBLY
10. Lower front cover
1) Detach the right/left cover assembly.
2) Remove the document tray driving unit. Refer
to the section entitled "Document tray front
cover".
3) Take off the lower front cover
by removing
three screws
.
Screw
Lower front cover
Fig. 3-125
11. Upper unit
1) Detach the right/left cover assembly.
The upper unit should be closed.
2) First, remove one screw
to release the leaf
spring
.
Remove two screws (with round-shaped tips)
and dismount the damper (white)
.
Loosen one screw
of the tensioner
and
remove the E-ring
, pulley
, and pin
and belt
in sequence. Remove the
additional two screws
and detach the pivot
.
Note:
Be careful not to drop the parallel pin.
Screw
Leaf spring
Screw
Damper
Tensioner
Screw
E-ring
Pulley
Pin
Belt
Screw
Pivot
Fig. 3-126
Summary of Contents for DR-6080
