Canon DR-6080 Service Manual Download Page 9

Page: 9 / 366

1 - 1

CHAPTER 1 General Description

CHAPTER 1 GENERAL DESCRIPTION

I. FEATURES

1. High Speed Scanning

Various-sized papers, from name cards or checks up to A3, can be scanned at high speed.

DR-9080C (Color, Grayscale, Binary)

DR-6080 (Grayscale, Binary)

50ppm (A4, 200 dpi, Color)
90ppm (A4, 200 dpi, Grayscale)
90ppm (A4, 200 dpi, Binary)

60ppm (A4, 200 dpi, Grayscale)
60ppm (A4, 200 dpi, Binary)

2. High

Durability

The unit is designed for a lifetime of up to 6 million sheets.

3. Easy

Maintenance

Replacing the rollers, including the pick-up roller, feed roller and retard roller, can be handled by the
user.

4. New

Functions

New functions such as staple detection and double feed detection by ultrasonic are available.

Fig. 1-101

Windows

is a registered trademark of Microsoft Corporation in the U.S. and other countries.

Other company names and product names mentioned in this manual are registered trademarks or
trademarks of the respective companies.

Summary of Contents for DR-6080


































































































































































































































































































































































Search results

Summary of Contents for DR-6080

Reviews:

Related manuals for DR-6080

Brands by name

Popular brands

Canon DR-6080, Service Manual

Search results

Summary of Contents for DR-6080

Reviews:

Related manuals for DR-6080

Brands by name

Popular brands