![background image](http://html.mh-extra.com/html/canon/dr-6080/dr-6080_service-manual_62889094.webp)
3 - 12
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
CHAPTER 3 DISASSEMBLY & REASSEMBLY
II. DRIVE
SYSTEM
(MOTORS)
1. Main
motor
1) Detach the right cover assembly.
2) After removing four screws
, detach the
belt
and pull out the main motor assembly
.
Screw
Belt
Main motor assembly
Fig. 3-201
3) Remove two screws
, unhook the
connector
, and detach the main motor
.
Connector
Screw
Main motor
Fig. 3-202
Precautions during assembly
•
Fix the main motor assembly position so that
the belt does not miss the sprockets.
However, the fixing should not be tightened too
much.
Summary of Contents for DR-6080
