![background image](http://html.mh-extra.com/html/canon/dr-6080/dr-6080_service-manual_62889099.webp)
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
3 - 17
CHAPTER 3 DISASSEMBLY & REASSEMBLY
3) Remove four screws (with round-shaped tips)
and detach the retard roller unit
.
Unhook the connector
.
Screw
Retard roller unit
Connector
Fig. 3-213
4) Remove two screws
and dismount the
retard motor
.
Screw
Retard motor
Fig. 3-214
Reference: Light guide
The following describes the
disassembly/reassembly of the light guide,
which is installed at the lower entry guide plate
shown in the previous section, "Retard motor".
•
Unhook the arm
of the light guide by
bending it to the direction of the arrow and
detach the light guide
. Be careful not to
damage the arm. You can remove the light
guide.
Arm
Light guide
Fig. 3-215
•
There are two types of projections on the light
guide: round
and oval
. Install the
projections in the matching holes and insert the
arm into the hooks until it clicks.
Round
Oval
Fig. 3-216
Summary of Contents for DR-6080
