![background image](http://html.mh-extra.com/html/canon/dr-6080/dr-6080_service-manual_62889168.webp)
5 - 18
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
CHAPTER 5 TROUBLESHOOTING
c) Feeder
2
Fig. 5-322 shows the window displayed after
selecting 'Feeder 2’ from the box menu.
In this figure, the analog values for the
document guide width sensor, document sensor,
document tray HP sensor and staple sensor (on a
one-by-one basis) are displayed. The mark for
the sensor that has detected a document will
illuminate.
However, the operation of the document
guide width sensor and staple sensor are
checked here, and the operation of the document
sensor and document tray HP sensor are
checked with the “Dcon Check".
•
Document guide width sensor
Slide the document guide and check that the
output value varies accordingly.
•
Staple sensor
Block the light path of the staple sensor and
check that the lamp illuminates.
To close the window, press the ‘Close’
button.
Fig. 5-322
Output of the document guide width sensor
Document sensor
Document tray HP sensor
Staple sensor
Summary of Contents for DR-6080
